| |
Advantages of product line
- Low to Zero VOC
- No formaldehyde
- Low to no odor
- Fights indoor air pollution
- Meets or exceeds all federal
and state air quality regulations, including California
Warranty
Please contact us for warranty information.
Product specifications below for:
Safecoat Sealers
Environmental Benefits
Safecoat strives to
set the
standard for the safest, most non-polluting products for your home, your
health and the planet. Safecoat products have been formulated with
a view toward human health and the elimination of toxicity.
Available product line
Safecoat Sealers
|
|
Safecoat Lock-In Sanding Sealer
Safecoat Lock-In Wood
Sanding Sealer is a unique, fast drying, sandable sealer
especially formulated to reduce raising of the grain on raw wood
when waterbased finish products are applied. Safecoat Lock-In
also helps to prevent bleed through of naturally occurring oils,
tannins, turps and resins in wood. This is especially important
for appearance and for those with sensitivities to such bleed
thru materials.
|
|
Safecoat |
Lock-In |
|
|
5-Gallon |
|
|
|
Safecoat |
Lock-In |
|
|
Gallon |
|
|
MSDS |
|
|
Safecoat MexeSeal
Safecoat MexeSeal is a low odor
waterbased, medium gloss clear sealer.
It is suitable for use on porous
interior tile or masonry surfaces where
oil and water repellency are desired. It
is ideal for long term protection
against food, oil and water stains on
residential or commercial floors.
Safecoat MexeSeal is non-hazardous and
non-flammable - a total replacement for
high solvent content systems.
|
SC31107 |
Safecoat |
Mexeseal |
|
|
Gallon |
|
|
MSDS |
|
|
Safecoat Penetrating Water Stop
Safecoat Penetrating WaterStop improves
water resistance and repellancy in a
wide variety of surfaces, including
brick walls, concrete foundations,
stucco, stone and most unglazed tile.
Because Safecoat Penetrating WaterStop
is not toxic and low odor, it is ideal
for use indoors instead of a typical
high solvent content sealer; yet, it is
durable enough for use outdoors. |
MSDS |
|
|
Safecoat Safe Seal
Safecoat
Safe Seal is a multi-use, waterbased,
low gloss sealer for highly porous
surfaces such as particle board,
plywood, processed wood and porous
concrete. Used primarily to reduce toxic
outgassing: in particular, it is highly
effective at sealing in formaldehyde
outgassing from processed wood such as
plywood, particle board and pressed
wood. Safecoat Safe Seal is virtually
odorless on application and odorless
once cured.
|
SC31104 |
Safecoat |
Safe Seal |
|
|
Gallon |
|
|
SC31204 |
Safecoat |
Safe Seal |
|
|
Quart |
|
|
MSDS |
|
|
Safecoat Hard Seal
Safecoat Hard Seal is a multi-use,
clear gloss sealer especially formulated to provide mar
resistance to both low and high porosity surfaces. Because it
forms a continuous membrane when applied properly it is
particularly effective at sealing in any pollution or toxic
chemical compounds outgassing from the surface to which it is
applied.
|
SC31101 |
Safecoat |
Hard
Seal |
|
|
Gallon |
|
|
SC31201 |
Safecoat |
Hard
Seal |
|
|
Quart |
|
|
MSDS |
|
|
Safecoat Water Shield
Safecoat WaterShield is a clear,
versatile, controlled penetration water repelling sealer which
provides an invisible barrier against water and resists oils,
grease and similar liquids. It is fast drying, has excellent
adhesion, and is easy to apply. In addition to sealing and
providing a protective barrier against water migration, it helps
to harden, dust proof and control efflorescence in masonry
surfaces. It is not toxic, non-flammable, lead and formaldehyde
free and does not contain surface contaminating silicones,
making it a desirable coating for interior or exterior use. May
be used on painted surfaces and may be painted over when dry.
Dries clear and does not discolor.
|
SC31109 |
Safecoat |
Watershield |
|
|
Gallon |
|
|
MSDS |
|
|
Safecoat Grout Sealer
Safecoat Grout Sealer is a clear,
moisture resistant sealer for porous tile grout and other
cementitious surfaces. It actually reacts with and becomes a
part of the grout, increasing water resistance and minimizing
the penetration of liquids, helping to prevent staining and
giving a wearable, washable surface. Like all Safecoat products,
it is as safe and not toxic as possible, formaldehyde free and
virtually odorless, giving off no offensive chemical fumes.
Dries clear without discoloration.
|
SC31203 |
Safecoat |
Grout
Sealer |
|
|
Quart |
|
|
MSDS |
|
|
